15in Outdoor Glass Bridge LED Display

15in OUTDOOR Sunlight Viewable Glass Bridge LED Monitor...

Its common knowledge that given time, ultraviolet radiation bleaches out colours and that the heat producing effect of infrared radiation has a negative effect on the liquid crystals and components in a LCD Display Panel.

AAdaptiv’s 15in Outdoor Glass Bridge Monitor design incorprates laminated safety glass with custom solarDEFIANT™ filter technology. This increases performance and protection against solar radiation in direct sunlight applications resulting in higher reliability and overall product longevity.

All Monitors are equipped with dimable LED Backlit Touch Sensitive controls built into the custom glass front bezel providing easy local operator control for: Backlight Brightness, OSD Functionality and Signal Source. incorporates the latest LED Backlight technology. This provides increased performance, higher reliability and longer life...

SPECIFICATIONS
DOCUMENTATION
DRAWINGS

PRODUCT NUMBER:
A8-1542S-DC

CONNECTIONS (x8 Source Inputs)
x2 DVI-I (Digital & RGB) signals: 29p DVI (Female)
x4 Composite signals: x4 BNC to 8P Circular (Male) - Souriau
RS232/422/485 Interface: 8p Circular (Female) - Souriau
DC Power Input: 4p Circular (Female) - Souriau

DISPLAY CHARACTERISTICS
Size / Type : 15.0” Active Matrix TFT
Native Resolution: 1024 x 768 Pixels
Aspect Ratio: 4:3
Pixel Pitch: 0.297 (H) x 0.297 (W) mm
Active Display Area: 304.128 (W) x 228.096 (H) mm
Response Time: 8 msec - Typical
Contrast Ratio: 700:1 - Typical
Brightness / Light Intensity: 1600cd/m² - Typical
Viewing Angles (at CR≥10): 80° - Typical (Left/Right/Up/Down)
Backlight Type: LED (Light Emitting Diode)
Backlight Dimming Range: 0 to 100% (Deep Dimming)
Backlight Life Time: 50,000 Hrs
Colour Depth: 16.7 Million - Depending on Graphics Card

USER CONTROLS / INDICATION / SENSORS
Glass Front Bezel: Touch Sensitive LED Backlit Buttons x5 for; Signal/Select, Menu, Down, Up & Power

Indicaton: Power GREEN (RED / Standby Mode) other (x4) BLUE
Sensors: Infrared Remote & Automatic Ambient Light Control

INPUT VOLTAGE
DC Input: 9 to 36V DC
Power Consumption: 51 watts

CONSTRUCTION
Glass Front Bezel: ‘Edge 2 Edge’ Glass bonded to aluminium machined sub-assembly

Rear Housing: Fabricated sheet aluminium - chemically treated & Powder Coated RAL 9005

Protective Safety Glass: Solar Absorbing Filter 6mm Laminated, AR coated & Optically Bonded directly to LCD Display Panel

Ventilation: Convection

Weight (Ibs): 5.5kg (12.1) approx. - Monitor ONLY

Surface Mount Height (inch): Height from surface 13mm (0.511”). Rear Fixing Bracket locations permit multiple monitors to be installed in close proximity

Console/Panel Cut-out Size: 351.9mm (13.854” ) W x 279.9mm (11.019”)

Dimensions (inch): 362.9mm (14.287” ) W x 291.9mm (11.492”) H x 93.7mm (3.688” ) D

ENVIRONMENTAL
Operating Temp. / Humidity: -15°C to +65°C / 30 to 95% N.C.
Storage Temp. / Humidity: -20°C to +65°C / 10 to 95% N.C.
IP Rating: Front Sealed to IP67 / NEMA 6 (Console mounted)

APPROVALS / SHIPPING / WARRANTY
Maritime Certification (pending): IACS E10, IEC 60945, IEC 62388 (Radar), ABS, DNV, LR & RINA

Compass Safe Distance: TBD

Carton Size & Weight: 52x45x12 cm & 8kg approx.

Warranty Period / Type: 2 Years / RTB (Return to Base)

DVI-A GRAPHIC DATA INPUT (x2)
Resolution: VGA (640 x 480) up to UXGA (1600 x 1200)
Pixel Frequency: Up to 165MHz
Analog: Nominal 0.7 V p-p (Max. 2.0V p-p)
Input Impedance: 75 Ω
Horizontal Frequency: 15kHz to 100kHz
Vertical Frequency: 30Hz to 100Hz for SXGA
Sync on Green: -2.0V to +5.0V
Separate H-Sync and V-Sync: 0.0V to +5.0V

DVI-D GRAPHIC DATA INPUT (x2)
Resolution: VGA (640 x 480) up to UXGA (1600 x 1200)
Pixel Frequency: 25 to 165MHz (30Hz to 65Hz for UXGA)
Vin low max: 0.8V
Vin high min: 2.0V
HDCP: Ready - requires external Licence

COMPOSITE VIDEO DATA INPUT (x4)
Input Source: NTSC/PAL/SECAM + All Sub Standards

NOTES
1) Mounting Styles: Standard mounting brackets enable installation in Consoles up to 30mm (1.18in) thick. Equipped with VESA 100mm compliant rear fixing holes.

2) User Controls: Touch Sensitive LED illuminted buttons are integerated into the Front Glass providing functionality for; Power, Brightness ( + & - ), Signal Source & OSD Menu.

3) Marine Compliances: Monitors are ‘Designed to Comply’. Program for full independent certification scheduled for Q2 2012 - subject to demand.

4) Accurate Dimensions: Go to www.aadaptiv.com and download relevant 3D Model / .DWG drawing

5) EDID Support: Programmable memory onboard pre-progarmmed with universal EDID info...

* Due to a policy of continuous product development Aadaptiv Technologies Limited reserves the right to change specifications and descriptions without prior notification.

General Data Sheet >>	A4 Size	US Letter
Technical Data Sheet >>	A4 Size	US Letter
Installation Guide >>	A4 Size	US Letter
User Manual >>	A4 Size	US Letter
Operator Controls - Quick Guide >>	A4 Size	US Letter
RS232/422/485 Protocol Manual >>	A4 Size	US Letter
Serial Communications Utility >>	A4 Size	US Letter

General Assembly PDF >>
General Assembly AutoCAD >>
3D SolidWorks STEP Files >>